Rec Tec Grills BULL RT-700 Owner's Manual page 23

Back to Table of Contents
VEr XXX displays current
software version.
Screen 5-1 is test mode for your
auger motor. You should be able to
look in your grill's fire pot and see
the end of the auger turning very
slowly.
Screen 5-2 is test mode for your
grill's ignition system. You should
be able to look into grill's fire pot
and see your ignitor begin to glow
within a few minutes. DO NOT
TOUCH THE IGNITOR.
Screen 5-3 is test mode for your
grill's blower fan. You should be
able to hear the fan blowing.
Screen 5-4 is test mode for your
grill's control knob. You can turn
the knob to see the 000 value
increase and decrease as you turn
the knob.
Screen 5-5 is test mode for your
grill's temperature sensor and
Probe A and Probe B. You can
see the temperature values for
each displayed on the screen. (A
value of - - - means the probe is not
plugged in or the grill's sensor is
not connected).
Screen 5-6 is a internal quality
control screen that has no function
for the user.
Screen bYE is the final screen of
the test mode. Pressing the power
button again will return you to
Screen 5-1. Pressing the settings
button will return you to the
Settings Menu, at which time you
can hold the Settings Button to exit
Settings Menu and get you back to
a blank screen.
Questions? Call or check out our FAQ! ©2019, Rec Tec Industries, LLC
23