Rec Tec Grills BULL RT-700 Owner's Manual page 32

We pride ourselves on our grills, grilling accessories, and on our
commitment to serve you. Please consult the chart below to help
resolve issues you may encounter. Also, please don't hesitate to
Issue
Fire
continues
to go out
Pellets are
not being
delivered
to fire pot
Flare ups
Excessive
grease/
build up
Questions? Call or check out our FAQ!
contact us with any issues.
Potential Cause
Pellet quality / age
Hopper obstruction
Hopper obstruction
Auger failure
Excessively
greasy food while
temperature setting
is too high
Excessively greasy
food
Solution(s)
Inspect pellets; ensure that pellets
are dry and have not broken down
into sawdust.
If problem persists, remove pellets
from the hopper and clean ash
from your fire pot, replace with
clean dry pellets.
Unplug grill. Remove pellets from
hopper. Clean hopper of any
obstructions or build up.
Unplug grill. Remove pellets from
hopper. Clean hopper of any
obstructions or build up.
Remove cooking grate and flame
deflector plate; visually inspect
auger turning in the fire pot.
(Note: the auger turns very slowly)
If auger is not turning, you may
have an obstruction in your hopper.
Clean out pellets and try again. If
problem persists, your auger motor
may need to be replaced. Call
Customer Service.
Cook at 350ºF degrees or below
when cooking excessively fatty
foods.
Cook at 350ºF degrees or below
when cooking excessively fatty
foods.
32
Back to Table of Contents
©2019, Rec Tec Industries, LLC