Front Shelf Installation; Want A Front Shelf?; Attach Legs And Front Folding Shelf - Rec Tec Grills BULL RT-700 Owner's Manual

Go Back to

Attach Legs and Front Folding Shelf

Carefully remove shelf from carton. Place it on a blanket
or piece of cardboard to prevent it from being scratched.
The shelf should be in the closed position when mounting
it on your grill. This is the same position you will find it in
when it is removed from the box.
2a: The next step is easier
if you have a helper.
Position the shelf bracket
on the existing holes and
place the bolts through
the shelf bracket and leg
bolt holes. Next place the
washer, lock washer and
nut on the bolt and tighten.
2c: To operate,
lift the shelf
upward until the
spring buttons
pop into the
shelf side holes.
DO NOT FULLY TIGHTEN HARDWARE UNTIL
STEP 3: "ATTACH BOTTOM SHELF" IS COMPLETED!
Questions? Call or check out our FAQ!

Want a Front Shelf?

Assembly
Tip: The more you use your
shelf the easier the spring
buttons will pop into place.
Click to continue
Front Shelf
to Step 3
17
Back to Table of Contents
Buy a
2b: Adjust the shelf
frame so you have
enough clearance
when opening and
closing the shelf.
You may need to
adjust the frame
outward 1/16"
or less to prevent
the shelf from
hitting the frame
during operation.
The bolt hole is
cut oblong to
accommodate this
adjustment.
©2019, Rec Tec Industries, LLC