Table of Contents
Advertisement
We pride ourselves on our grills, grilling accessories, and on our
commitment to serve you. Please consult the chart below to help
resolve issues you may encounter. Also, please don't hesitate to
Issue
Grill will not
light / turn on
Questions? Call or check out our FAQ!
contact us with any issues.
Potential Cause
Power
Fuse
Ignitor
Auger motor
Control board
Solution(s)
Make sure power is plugged into
working GFCI outlet, and outlet is
not tripped. Unplug grill and check
for blown fuse; refer to:
Controller Schematic
Replace fuse manually and try
again. Call Customer Service or
visit RECTECGRILLS.com if problem
persists.
Remove cooking grates, flame
deflector, and drip pan; visually
inspect fire pot and if after 10
minutes:
•Your pellets are feeding
•Your blower fan is running and
your grill is still not lighting;
then your ignitor rod may need
to be replaced.
Call Customer Service.
Remove cooking grates, flame
deflector, and drip pan; visually
inspect auger turning in the fire pot.
(Note: the auger turns very slowly).
If auger is not turning, you may
have an obstruction in your hopper.
Clean out pellets and try again. If
problem persists, your auger motor
may need to be replaced.
Call Customer Service.
UNPLUG GRILL.
Check to make sure the fuse is
intact and has not blown.
Check for any loose wire
connections. If any wires have
become detached, refer to:
Controller Schematic
30
Back to Table of Contents
©2019, Rec Tec Industries, LLC
Hide quick links:
Advertisement
Table of Contents
