In case of ignitor failure, you can start your
1. Remove the stainless steel grates, drip pan and flame
deflector.
2. Clean out fire pot and place no more than 1/2 cup of pellets
in the bottom. Add a small amount of solid fuel fire starter,
such as those made from sawdust and wax or use wood
shavings.
Tip: A paper towel, shredded cardboard,
or shredded newspaper can work as a substitute.
If you have a torch lighter, a fire starter is not needed.
3. Light the fire starter.
4. After the pellets are burning briskly, turn on your grill. If your
fire goes out, repeat steps 1-4.
5. If your fire stays lit, replace the stainless flame deflector, drip
pan and cooking grates and close the lid.
OR SIMILAR LIQUIDS TO START OR FRESHEN-UP THE
FIRE! KEEP ALL SUCH LIQUIDS WELL AWAY FROM
THE GRILL WHILE IT IS IN USE.
Questions? Call or check out our FAQ!
REC TEC BULL manually:
Be careful not to touch the fire.
CAUTION: DO NOT USE FLAMMABLE
LIQUIDS SUCH AS GASOLINE,
GASOLINE-TYPE LANTERN FUEL,
KEROSENE, CHARCOAL LIGHTER FLUID,
34
Back to Table of Contents
©2019, Rec Tec Industries, LLC