probst VPH-150 Operating Instructions Manual page 10

General

The load (stone slabs) which is to be sucked and
transported, must have sufficient inherent stability,
otherwise there is risk of breakage when lifting!

Stone slabs must not be bend when lifting - especially take
care with thin and large-sized stone slabs!

Generally, the load (stones slab) is only to be sucked in the
middle, otherwise the load hangs diagonally under the
device and the load could break - especially when lifting
large stone slabs with a small suction plate.

Standard suction plates are not suitable for the transport of
glass plates!
Only suction plates of the manufacturer PROBST shall be used!!!

Some suction plates which can be mounted to the device will reduce its carrying capacity.
The maximum load is indicated on each suction plate.

Use only suction plates which are approved for this device!
Do not exceed the maximum carrying capacity of the suction plates!
Danger: Load (stone slabs) will fall down!
NOT ALLOWED ACTIVITIES:
Unauthorized alterations of the device and the use of any self-made additional equipment could cause
danger and are therefore forbidden!
Never exceed the carrying capacity and the nominal width/nominal size of the device.
All unauthorized transportations with the device are not allowed:

Transportation of people and animals.

Transportation of other loads and materials than described in this manual.

Never suspend any goods with ropes, chains or similar at the device.
5271.0008 V1
10 / 24
GB