Additional Information; Using The Setup Menu - Sony RCD-W100 Operating Instructions Manual

Additional Information

Using the Setup Menu

You can make various settings on this unit by
using the Setup Menu.
When using the remote, set DECK A/DECK B
to DECK B.
1
Press MENU/NO.
2
Turn AMS (or press ./> on the
remote) to select the setup item, and
press AMS (or YES).
3
Turn AMS (or press ./> on the
remote) to set the item, and press AMS
(or YES).
4
Press MENU/NO.
To initialize an item's parameter
Press CLEAR after step 2.
Notes
• The menus you can use while the unit is stopped,
playing, or recording differ.
• The setting is stored in memory even if you turn off
the unit or disconnect the power.
Menu items
Setup item Function (reference page)
Make Disc Sets whether Make-Disc Synchro-Recording is performed
when using the CD SYNCHRO NORMAL or CD SYNCHRO
HIGH buttons (page 22).
DECK A Lvl Adjusts the input level from DECK A (page 27).
Optical Lvl Adjusts the input level from the DIGITAL OPTICAL IN jack
(page 27).
Track Mark Sets the Track Marking Function (page 28).
LSync Lvl Changes the trigger level for Track Marking Function (page 28). –72 dB to –20 dB in 2 dB
Silent Pause Sets the Silent Pause Function (page 34).
Direct Sets the Direct Recording Function (page 34).
Post Gap Sets the function to add Post Gap (page 34).
MENU/NO
CLEAR
DECK A/DECK B
MENU/NO
./>
Parameters (Initial setting)
On/Off (Off)
– dB to +18 dB (0.0 dB)
– dB to +18 dB (0.0 dB)
LSync/Off (LSync)
increments (–50 dB)
On/Off (On)
On/Off (Off)
On/Off (Off)
YES
AMS
YES
CLEAR
35