Advertisement
14.Buttons
ITEM
Button
General Display Mode
(TRIP)
Setting Mode
Escape from Setting
Mode
Operation Status
Remarks
SPECIFICATION
"MODE" switch
Press SET for 3 seconds to reset TRIP at "00.0".
Press MODE and SET simultaneously for more than 2 seconds. to enter "Setting
Mode", then 『Hour：MIN』start flashing.
(1) When『Hour』flashing:
Press SET to increase of number, then press MODE to enter "Setting Mode" of
『MIN』.
(2) When『MIN』flashing:
Press SET to increase of number, then press MODE to enter "Setting Mode" of
『km/h & mph』.
(3) When 『km/h』 or 『mph』flashing
Press SET to choose "km/h" or "mph" type, then press .MODE to enter "Setting
Mode" of 『°C / °F』
(4) When『°C』or『°F』flashing
Press SET to choose °C or °F .
Under setting mode, if below situations happened, will auto save the last setting value
then escape to general operation mode.
(1) No any operation of ADJ button for 20 sec.
(2) Press MODE and SET at same time for more than 2 sec.
(1) 『Hour：Min』,『km/h』or『mph』,『°C』or『°F』offer Cyclical Switch
function.
(2) When adjusting 『Hour：Min』, press SET to increase number, if press SET for
more than 2 seconds, the number will increase continuously until button released,
setting value with Cyclical Switch function (only 2 seconds from 0 to 9).
* If『Hour』less than 10, the denary "0" doesn't display.。
Button tones: one short "Bi" sound
Function set
! 23
Hide quick links:
Advertisement
