Checking For Proper Operation - Keiser M3X User Manual

38
WARNING: Perform the operations below before riding to make sure the bike is fully
!
operational. Failing to test a bike prior to normal use will void your warranty and could result
in serious injury.

CHECKING FOR PROPER OPERATION

[ ] All Parts Correctly Installed
[ ] Acorn Nuts Torqued At 45 Nm (35 ft-lbs)
[ ] Pedals Loctited and Torqued To 45 Nm (35 ft-lbs)
[ ] All Screws and Nuts Properly Torqued and Tightened
[ ] Handlebar and Seat Adjustments Operate Properly
[ ] Apply LPS #3 To flange and screws that mount the main frame (C) to the base frame (B)
[ ] Apply LPS #3 To left bottom bracket bearing (Fig. 40a)
[ ] Apply LPS #3 To the clip-in portion of the pedals (Fig. 40b)
a
[ ] Bike Has Been Polished With Paste or Spray Wax and a Clean Cloth
[ ] Computer Installed and Calibrated and In Working Order
NOTE: Since we are always striving to improve our products; our products are
!
subject to change without notice.
WARNING: Failure to follow the below safety information and instructions could result in
!
personal injury or loss of life. Use this equipment only for its intended use as described in this
manual. Please read all the information provided for safe operation.
11
39
b
40