Table of Contents
Advertisement
Functionality of the Main Menu
Audio Meter Display Mode
1.
METER SELECT controls the amount of channels displayed in an audio
meter. As shown in Figure 5.1-10, the meter displays at the left bottom
of the screen vertically. For example: the METER SELECT is G1+G2.
There is a white rectangle frame with two white level lines in the meter,
the upper is the over level line, and the lower is the reference level line.
If the audio value is higher than the reference level, the audio bar over
the reference level line will display yellow, and if the audio value is
higher than the over level, the audio bar over the over level line will
display red.
Figure 5.1-10 The Position of the Audio Meter On Screen
Audio Meter Display Position
2.
The position of Meter is controlled by METER POSITION item, the
position of the meter on the screen is as follows: LEFT, RIGHT. For
example, the illustrations of the positions are as shown in Figure 5.1-11:
Figure 5.1-9 Audio Meter
34
Advertisement
Table of Contents
