OSEE LMW-4320 User Manual page 37

Default
Items
Value
Page 4
BACK LIGHT 15
Internal
OFF
Signal
OSD Time ON
Status
OFF
Display
LANGUAGE ENGLISH
Factory Reset --
Display Multiple Images
1.
This monitor allows simultaneous display of two input signals on the
monitor's screen. It will introduce the display mode, settings and signal
source selection for the multiple images on screen as follows.
5.1.4.1 FUNCTION KEY and User Preset Menu
User Preset
1.
The user preset provides a series of menu settings customized as a User
Preset, up to 4 presets could be defined in this device.
Set USER CONFIGUser Preset as User1, User2, User3 or User4 to
switch among these various preset settings for current menu display. Or
press UP button
presets, and there will be a prompt displaying the current user preset
name at the left center of the screen.
The FUNCTION KEY menu items(F1 Button~F4 Button) are used to
assign function to the function key (F1~F4) on the front panel, and adjust
the value of the function parameter. The menu items of FUNCTION KEY
are as shown in Table 5.1-7:
Table 5.1-7 Functionalities for the Function Key
Items Default Value Range
Color
OFF
Comparison
Domain Range
0~30
OFF/ON
ON/10s/30s/60s
OFF/ON/AUTO
ENGLISH/CHINESE
--
or DOWN button
OFF/ON
31
Functionality of the Main Menu
Description
Adjust the back light
Enable/Disable
internal color bar
Set the display time of
the OSD menu
Set the display time of
the Status information
menu
Select
mode
Set whether to restore
the factory settings
to switch among these user
Description
Enable/Disable Color Comparison
the
a language