Section 4: Operations; Basic Controls - Grizzly G0677 Owner's Manual

SECTION 4: OPERATIONS

To reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-24-
Refer to Figures 25–28 and the descriptions
below to become familiar with the basic controls
this entire
and components of your planer/sander.
Control Panel
Amp Load Meter: Indicates the current amp load
on the main motor when a planing and sanding
operation is in progress.
Sanding Belt Start and Stop Buttons: Turns the
sanding motor ON and OFF if the planer/sander
has air pressure, the belt is tensioned, the power
is connected, and all access doors are closed and
locked.
Feed Belt Start and Stop Buttons: Cycles the
feed belt motor ON and OFF for feeding wood into
the planer/sander.
Belt Start
Belt Start

Basic Controls

Amp Load
Meter
Sanding
Button
Feed
Button
Power
Light
Figure 25. Control panel.
G0677 24" Planer/Sander
Sanding
Belt Stop
Button
Feed
Belt Stop
Button
Front Stop
Button