Section 4: Operations; Basic Controls - Grizzly G0453Z Owner's Manual

SECTION 4: OPERATIONS

To reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
Model G0453Z/G0454Z (Mfg. 1/09+)
Use Figure 14 and the following descriptions to
become familiar with the basic controls of your
this entire
planer.
A. Magnetic ON/OFF Switch: Starts/stops the
B. Return Rollers: Provide a convenient meth-
C. Table Height Handwheel: Controls the ele-
D. Feed Rate Control Knob: Switches the feed
E. Table Locks: Locks the table in position so it

Basic Controls

A
B
Figure 14. Basic controls.
planer.
od for returning workpieces to the infeed side
of the planer.
vation of the table under the cutterhead.
rollers between high and low feed rates or, in
the center position, stops the feed rollers.
does not move during operations.
C
D
E
-21-