Clean Up - Grizzly G0677 Owner's Manual

Clean Up

Any unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
degreaser, such as shown in Figure 9. For thor-
ough cleaning, some parts must be removed.
For optimum performance, clean all moving
parts or sliding contact surfaces. Avoid chlo-
rine-based solvents, such as acetone or brake
parts cleaner that may damage painted surfac-
es. Always follow the manufacturer's instructions
when using any type of cleaning product.
Gasoline and petroleum
products have low flash
points and can explode
or cause fire if used to
clean machinery.
NOT use these products
to clean the machinery.
Many cleaning solvents
are
Minimize your risk by only
using these products in a
well ventilated area.
G2544—Solvent Cleaner & Degreaser
H9692—Orange Power Degreaser
Great products for removing shipping grease.
Figure 9. Cleaner/degreasers available from
Grizzly.
G0677 24" Planer/Sander
DO
toxic if inhaled.
The following surfaces need to be cleaned:
• Upper steel sanding belt roller
• Spiral cutterhead
To access the steel sanding belt roller (Figure 10),
unlock the right or left access doors, and clean as
needed.
Upper Steel
Sanding Belt
Roller
Hex Bolts
Securing Spiral
Cutterhead
Wing Nut
Bracket
Tension Bolt
Figure 10. Access to cleaning locations.
Foot Pedal
Latch
-15-