The Extended Menu "Advanced Menu - Sennheiser SK 300 Instruction Manual

Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Transmission situation
Loud music/vocals
Presentations
Selecting the frequency bank and the channel manually –
"Frequency Preset"
Frequency Preset
Menu
B.Ch:
Frequency Preset
B.Ch: 5.14
Call up "Frequency Select the
Preset"
frequency bank
and confirm
"Stored"
When you are in the
the RF signal is deactivated.
Overview of the frequency banks and channels:
Frequency
bank Channels
"1" to "20" up to 24 per
frequency
bank
"U1" to "U6" up to 24 per
frequency
bank
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 29).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
It is vital to observe the notes on frequency
selection on page 29.
Entering a name – "Name"
SET
Menu Name
L i c h a e l
Name
L i c h a e l
Call up "Name" Enter a character
and confirm
"Stored"
Via the "Name" menu, you can enter a freely selectable
name (e.g. the name of the performer) for the bodypack
transmitter.
The name can be displayed on the standard displays
"Frequency/Name" and "Name/Channel". The name can
consist of up to 8 characters such as:
• letters (without pronounciation marks),
22
Sensitivity setting
−30 to −21 dB
−21 to 0 dB
SET
Frequency Preset
5.14 B.Ch: 1.14
MHz MHz
Select the channel;
store the setting
SET
"Frequency Preset" menu item,
Type
System bank:
frequencies are factory-
preset
User bank:
frequencies are freely
selectable
SET
Name
Michael
Enter a character;
store the setting
SET
Adjusting settings via the operating menu
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Press the UP/DOWN button
character.
Press the SET button to change to the next
segment/character or to store the complete
entry.
Activating/deactivating the automatic lock mode –
"Auto Lock"
SET
Auto Lock
Menu
Auto Lock Active
A c t i v e
Call up Select the desired
"Auto Lock" setting
"Stored"
The lock mode prevents that the bodypack transmitter is
accidentally switched off or programed during operation.
The lock mode icon
indicates that the lock mode is activated.
Press the UP/DOWN button
desired setting.
For information on how to use the lock mode, refer to
page 13.
The extended menu
Setting transmission frequencies and frequency banks –
"Tune"
When you have selected one of the system banks
and then select the "Tune" menu, the bodypack
transmitter automatically switches to channel 1 of
the frequency bank "U1". In this case, "U1.1" briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
"U1" to "U6" are not assigned a transmission
frequency.
When you are in the "Tune" menu item, the
RF signal is deactivated.
Via the "Tune" menu item, you can set a transmission
frequency to be stored in the current channel
select a different channel in one of the frequency banks
"U1" to "U6" and assign this channel a transmission
frequency.
It is vital to observe the notes on frequency
selection on page 29.
/ to select a
Auto Lock
I n a c t i v e
Store the setting
SET
on the current standard display
/ to select the
"Advanced Menu"
or you can
23