Sennheiser SK 3063 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. Sennheiser Manuals
  4. Transmitter
  5. SK 3063-U
  6. Instructions for use manual
Sennheiser SK 3063 Instructions For Use Manual

Sennheiser SK 3063 Instructions For Use Manual

Hide thumbs Also See for SK 3063:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTIONS FOR USE
SK 3063-U
MIKROPORT BODY-PACK TRANSMITTER

Advertisement

Table of Contents
loading

Related Manuals for Sennheiser SK 3063

Summary of Contents for Sennheiser SK 3063

  • Page 1 INSTRUCTIONS FOR USE SK 3063-U MIKROPORT BODY-PACK TRANSMITTER...
  • Page 2 Brief description SK 3063-U In combination with a connected microphone, the transmitter can be used as a wireless microphone. Its flat shape and small dimensions make this design especially well-suited for particular applications in which an inconspicuous appearance is required, as is the case with film and television productions, for example.

  • Page 3: Controls And Connections

    Controls and connections 1 ANTENNA SOCKET 2 CHANNEL SELECTOR SWITCH 3 OPERATING TIME DISPLAY 4 ON / OFF SWITCH 5 OPERATION / PEAK DEVIATION INDICATOR 6 SENSITIVITY SELECTOR SWITCH FOR MICROPHONE INPUT 7 MICROPHONE INPUT...

  • Page 4: Microphone Selection

    B 50). After inserting the batteries, the cover of the quick-change energy pack is to be snapped into place. The LED display on the front side of the energy pack (fig. 1) serves as a battery control display.
  • Page 5 FIG. 2 FIG. 3 quick-change energy pack quick-change energy pack B 50 B 250 CLOSE COVER NOTE: ALKALINE-MANGANESE LRC AA TYPE BATTERIES ARE TO BE USED EXCLUSIVELY. PERFECT FUNCTIONING OF THE TRANSMITTER IS GUARANTEED ONLY WITH THIS TYPE OF BATTERY.

  • Page 6: Rechargeable Battery Display

    BA 50 / BA 250 quick-change energy pack The LC display on the front side of the energy pack (fig. 4) serves as a battery control display. FIG. 4 RECHARGEABLE BATTERY DISPLAY 100 % SK 3063-U 80 % 60 %...

  • Page 7: Channel Selection

    Sensitivity selector switch The sensitivity selector switch 6 can be used to adapt the gain of the microphone input in 8 steps to the level of the sound expected. This setting is to be made in combination with a receiver which has a peak indicator available.

  • Page 8: Attachment Of The Body-Pack Transmitter

    The device is to be protected against falling out by a tight gripping clip with which the transmitter can also be attached to the waistband or to a belt. To attach the transmitter with the connections facing downwards, simply reverse the clips.

  • Page 9: Technical Data

    AF: Lemo special (3-pin) RF: Lemo special coax Dimensions with power pack 94 x 60 x 17 mm with B 50 / BA 50 116 x 60 x 17 mm with B 250 / BA 250 Weight with power pack approx.
  • Page 10 Aktuelle Informationen zu Sennheiser-Produkten erhalten Sie auch im Internet unter „http://www.sennheiser.com“. For up-to-date information on Sennheiser products, you can also visit the Sennheiser Web site at “http://www.sennheiser.com”. Vous trouverez également toutes les informations actuelles relatives aux produits Sennheiser sur Internet à l’adresse Web “http://www.sennheiser.com”.

Table of Contents