Siemens SIMATIC PN/J1939 LINK Operating Instructions Manual page 48

Configuring / programming
9.3 PN/J1939 LINK assign parameters
Devices & networks
Follow these steps:
1. In the HW catalog
number and double-click on it.
PN/J1939 LINK appears in the "Devices & networks" window.
2. Connect the CPU and PN/J1939 LINK via a PROFINET connection.
CPU and PN/J1939 LINK are linked via a green PN line
window.
3. Configure the PROFINET interface of the PN/J1939 LINK
of your PROFINET network.
Figure 9-1
46
①
, select a PN/J1939 LINK corresponding to a concrete article
Devices & networks
②
in the "Devices & network"
③
according to the conditions
SIMATIC PN/J1939 LINK
Operating Instructions, 12/2018, A5E45307564-AA