Transportation; Storage - Siemens SIMATIC PN/J1939 LINK Operating Instructions Manual

Application planning

5.3 Transportation

Electromagnetic compatibility (EMC) / overvoltage protection
NOTICE
Damage to the device
Inadequately dimensioned overvoltage protection can result in severe damage to the
device. Always ensure, therefore, that the overvoltage protection is adequate
(see Chapter 24 V DC power supply (Page 38)).
Installation in control cabinet / device connection box
NOTICE
The device is intended for installation in a control cabinet or in a device connection box.
It is important to note that installation in a control cabinet or device connection box is
essential for compliance with the UL regulations.
The control cabinet / device connection box must satisfy the regulations regarding fire-
protection housing.
Ensure that all cables and leads that protrude externally are equipped with adequate strain
relief.
5.3 Transportation
The devices must be transported in a clean and dry state, preferably in their original
packaging. The transport temperature must be between -40 °C and +70 °C. Temperature
fluctuations greater than 20 K per hour are not permitted.
5.4

Storage

The devices must be stored in clean and dry rooms, preferably in their original packaging.
The storage temperature must be between -40 °C and +70 °C.
30
SIMATIC PN/J1939 LINK
Operating Instructions, 12/2018, A5E45307564-AA