Stihl HTA 65 Instruction Manual page 32

English
Definitions
1 Battery Compartement
Accommodates the battery in the
unit.
2 Support Foot (only special
accessory)
For resting machine on the ground.
3 Control Handle
The handle of the pole pruner held
by the right hand.
4 Trigger Switch
Switches the motor on and off.
5 Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
6 Retaining Latch
Locks or unlocks the trigger switch.
7 Carrying Ring
Connects the unit to the harness.
8 Handle Hose
For holding and controlling the unit
with the hand during operation.
9 Telescopic Drive Tube (Shaft)
Adjustable drive tube enables user
to optimize machine's reach.
10 Fixed Drive Tube
Encloses and protects the drive
shaft between the engine and
gearbox.
11 Oil Tank
Tank for chain lubricating oil.
12 Oil Filler Cap
For closing the oil tank.
30
13 Hook
For hooking the machine to a
branch and pulling branches away.
14 Chain Sprocket Cover
Covers the sprocket.
15 Quick-Release Clamp
For adjusting the length of the
telescopic drive tube.
16 Chain Sprocket
The toothed wheel that drives the
saw chain.
17 Chain Tensioner
Permits precise adjustment of chain
tension.
18 Guide Bar
Supports and guides the saw chain.
19 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
20 Battery
Supplies the motor with electrical
power.
21 Battery Locking Tabs
Secure the battery in the unit.
22 Push Button
For activating light emitting diodes
(LED) on battery.
23 Light Emitting Diodes (LEDs) on
Battery
Indicates the state of charge and
operating condition of the battery.
24 Light Emitting Diode (LED) on
Charger
Indicate charger operating mode
and certain problems.
25 Charger
Charges the battery.
26 Power Supply Cord for Charger
Supplies electric current to charger.
HTA 65, HTA 85