Fieldbus Box: M12 Can Socket; Fig. 15 Lc5100; Fig. 16 Pin Assignment: M12 Plug, Fieldbus Box - Beckhoff FC5101 Documentation

Fitting and wiring
Fig. 15: LC5100
Risk of device damage!
On account of the lack of electrical isolation, the CAN driver can be destroyed or damaged due to incorrect
cabling. Always carry out the cabling in the switched-off condition.
First connect the power supply and then the CAN. Check the cabling and only then switch on the voltage.
3.2.11

Fieldbus Box: M12 CAN socket

The IPxxxx-B510, IL230x-B510 and IL230x-C510 Fieldbus Boxes are connected to the bus using 5-pin M12
plug-in connectors.
Fig. 16: Pin assignment: M12 plug, fieldbus box
Beckhoff offer plugs for field assembly, passive distributor's, terminating resistors and a wide range of pre-
assembled cables for the Fieldbus Box system. Details be found in the catalogue, or under www.beckhoff.de.
20
NOTE
Version: 2.0 FC5101 and FC5102