SolarEdge EV Series Installation Manual page 83

82 Replacing the Connection Unit with Safety Switch
11. Insert the wires from the inverter into the openings in the Connection Unit with
Safety Switch and the ferrite bead.
12. Reconnect the cables: Follow the instructions of Installing the Inverter on page 30.
13. Close the inverter cover.
14. Fasten the Connection Unit with Safety Switch bracket using a standard bolt.
15. Perform the commissioning steps as described in Activating, Commissioning and
Configuring the System on page 42.
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1