Table of Contents
Advertisement
3.2
AMI BIOS Setup
AMI BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This type of information is stored in battery-backed CMOS RAM
and BIOS NVRAM so that it retains the Setup information when the power is turned off.
3.2.1 Entering Setup
Power on the computer and press <Del>or <ESC> immediately. This will allow you to
enter Setup.
Main
Set the date, use tab to switch between date elements.
Advanced
Enable disable boot option for legacy network devices.
Chipset
Host bridge parameters.
Security
Set setup administrator password.
Boot
Enables/disable quiet boot option.
Save & Exit
Exit system setup after saving the changes.
Chapter 3 – AMI BIOS Setup
16
Advertisement
Table of Contents
