Air Reservoir Kit, 16W366 - Graco InvisiPac Tank-Free HM25 Instructions - Parts Manual

Accessories
Light Tower Kit Installation
1. Turn main power switch OFF.
2. Disconnect cable from ADM, push cable through
plastic shroud, then remove shroud from system.
3. Remove existing grommet (AA) from electrical
enclosure then install new grommet (1204) in its
place.
4. Insert grommet (1202) into hole on the light tower
bracket (1203).
5. Remove bolts (BB) from metal shroud on the system
then use the bolts (BB) to secure bracket (1203) to
metal shroud.
6. Route light tower cable through hole in
bracket (1203) then use supplied light tower
screws (1201a) to install light tower (1201).
7. Remove electrical enclosure front access door.
8. Route light tower cable through the other hole in the
bracket (1203), then through the grommet (1204)
into the electrical enclosure.
9. Connect light tower cable to MZLP connector
labeled J12.
102

Air Reservoir Kit, 16W366

This kit allows the system to operate as low as 60 psi
(0.4 MPa, 4 bar).
1503
1505
1505
1506
16W366 Parts
Ref Part Description
1501 --- HOSE, nylon (6 ft)
1502 100081 BUSHING, pipe
1503 113777 TEE, branch
1504* 114485 CONNECTOR, male, 3/8 npt
1505 155665 UNION, adapter
1506 --- TANK, air, accumulator
--- Not for sale.
* Metric fitting included in Air Metric Fitting Kit,
24W637, page 110.
1504
1504*
1501
Qty
3A2347ZAA
1
1
1
2
1
1