Electrical Schematics; Incoming Power And Terminal Jumpers - Graco InvisiPac Tank-Free HM25 Instructions - Parts Manual

Electrical Schematics

Electrical Schematics
To prevent electric shock and system damage, all
electrical work must be performed by a qualified
electrician.
Incoming Power and Terminal
Jumpers
NOTICE
To prevent severe system damage, ensure terminal
jumpers are installed correctly. See Connect Electri-
cal Cord on page 18.
76
The incoming power and terminal jumpers are specific
to the phase and voltage used. The power type and cir-
cuit breaker size must be correctly set in the ADM. See
Select ADM Settings on page 20.
If changing power type, use the supplied hard metal 2,
3, and 5 terminal jumpers and screws and supplied
jumper wire to jumper the terminals. See Connect Elec-
trical Cord on page 18 for detailed information about
changing terminal jumper locations.
3A2347ZAA