Appendix.2Checklist - Mitsubishi Electric Melsec-QS Series Safety Application Manual

APPENDIX
Appendix.2 Checklist
No.
Backup and version management of a file
Were the created date and author entered at the top of the sequence program using the
1
statement function of GX Developer?
When modifying the sequence program, were the created date, author, and modified
2
description entered at the modified place using the statement function?
Were the data downloaded to the PLC stored into the hard disk of a personal computer or
3
CD?
Checking the setting
Was it confirmed that the link ID, station number, and transmission speed of the safety
4
remote I/O module on the site were set as designed?
5 Were the appropriate values set to Safety refresh monitoring time and WDT Setting?
When the safety system is shifted to the actual operation, is the operation mode set to the
6
SAFETY MODE?
Operation check
Were all safety application functions (e.g. emergency stop function, restart interlock)
7
inspected?
8 Were the response time of the safety application inspected?
Checking write data
Before writing the data to the PLC, was it confirmed that sequence program and
9
parameter setting values were configured as desired?
Was it confirmed that the ROM information of CPU corresponds with that of the project file
10
with the ROM information screen of GX Developer?
Others
Was it confirmed that there are no errors with the LEDs on the module and the PLC
11
diagnostics screen of GX Developer?
In output signals from a safety CPU module to the CC-Link Safety master module on
sequence program, was it confirmed that "prohibited to use" signal was not mistakenly
12
turned on or off? (For "prohibited to use" signal, refer to the CC-Link Safety System
Master Module User's Manual.)
Are the registered passwords (Login password, CPU access password) managed
13
properly?
TableApp.2 Checklist
Description Reference
Section 4.2(5)
Section 4.2(5)
Section 4.2(5)
Section 4.3(1)
Appendix.1
Section 4.4(3)
---
---
Section 4.3(2)
Section 4.4(4)
---
---
Section 4.4(5)
App
Appendix.2 Checklist
1
Check
2
3
4
5
- 8