Chapter5 Safety Application Configuration Example; System Configuration - Mitsubishi Electric Melsec-QS Series Safety Application Manual

5
SAFETY APPLICATION CONFIGURATION EXAMPLE
CHAPTER5 SAFETY APPLICATION CONFIGURATION
EXAMPLE
This chapter describes the configuration example of the safety application using the safety
PLC.

5.1 System Configuration

This section describes the safety application using the system configuration of Figure5.1
as an example.
Parameters
Programs
GX Developer
Master (1)
Safety master station (Link ID: 0, Station number: 0)
Master (2)
Safety master station (Link ID: 1, Station number: 0)
CC-Link Safety
Remote (1) Code name SR_IO1
Safety remote I/O station
(Link ID: 0, Station number: 1)
CC-Link Safety
Safety input
Safety switch
Light curtain
Laser scanner
Mat switch
Figure5.1 System configuration
Remote (4) Code name SR_IO4
Safety remote I/O station (Link ID: 1, Station number: 1)
Safety input
Emergency stop switch
Safety output
Safety relay
MC
Remote (2) Code name SR_IO2
Safety remote I/O station
(Link ID: 0, Station number: 2)
5.1 System Configuration
Remote (3) Code name SR_IO3
Safety remote I/O station
(Link ID: 0, Station number: 3)
Standard input
Reset switch
Start switch
Stop switch
5
- 1
1
2
3
4
5