Fujitsu AUU7RLF Design & Technical Manual page 114

2. Connect the remote controller cable.
• Connect the cable made in step 1. to the terminal (*1) of optional communication kit.
• Connect the cable from the terminal (*2) of communication kit to the indoor unit PCB.
Remote controller cable
 Pattern C
1. Modify the remote controller cable as follows:
• Use a tool to cut off the terminal on the end of the remote controller cable and then re-
move the insulation from the cut end of the cable as shown in following figure.
• Connect the remote controller cable and connecting cable as shown in following figure.
• Be sure to insulate the connection between the cables.
2. Connect the remote controller cable.
• Connect the cable made in step 1. to the indoor unit PCB.
¢ Optional parts
The communication kit is needed for connecting the wired remote controller to the wall mounted
type.
13-4. Simple remote controller (UTY-RSNUM: Optional part)
Connecting cable
Remote controller cable
Remote controller cable
Wall mounted
ASU7/9/12/15RLF1
Terminal
(*2)
Terminal
(*1)
Communication kit
Connecting
cable
White
Red
White
Insulated
Red
connection
Black
Connecting cable
Indoor unit PCB
- 108 -
Indoor unit PCB
Black
Model name
UTY-XCBXZ2
13. Remote controller