Advertisement
【Mode 1】：real-time positioning,Trajectory mode (default)
dagps APP→ point instruction →mode switch→trajectory mode→send
It is every 2mins/1 times
【Mode 2】：Roll call positioning,save power mode
Dagps APP-point instruction→mode switch→save power mode
→send→positioning→location
If you want to locate, you point locate . If you don't want to position it, device
into save power
【Mode 3】：
Use mobile phone call the device and hang up,you will receive positioning
or send
"smslink123456
(Standby time 15 days)
【Mode 4】：vibration save power mode
sending the positioning data when device vibration and not sending the data
When device static,In order to save power and save gprs cost
Use mobile phone
It is every 2mins/1 times positioning when device is vibrationed
6.Command
NOTE:
1) Device default password:123456),note the space in the command
2)use of mobile phone APP or send message to the tracker about all set command
3)If you want standby time longer, pls don't open move alarm, and real-time
location tracking.etc
positioning,(work 24 h)
automatically,( work 8 days)
sms mode positioning
"to sim card in tracker, you wil receive positioning
send"static123456
120"to sim card in tracker
8
(can work 3days)
Advertisement
