Installation Instructions - Heatscope PURE Original Installation And Instruction Manual

EN EN
UNPACKING THE UNIT / PACKAGING
Unpack the unit and the accessories carefully. When opening the packaging, do not use sharp objects that could damage
the unit.
This product comes supplied in environmentally friendly packaging. All HEATSCOPE
culation either directly or via the trade is certified in accordance with §6 of the German Packaging Directive. As a result,
®
all HEATSCOPE packaging can be disposed of in an environmentally friendly manner in collection containers for pa-
ckaging materials. All legal regulations must be observed here. Further information is available from the manufacturer.
Care information! Important! Clean the unit with a damp cloth before using it for the first time. Do not use cleaning
products containing alkaline substances such as sodium hydroxide or soap, surfactants or solvents/alcohol.

INSTALLATION INSTRUCTIONS

The different options for installing the HEATSCOPE
this manual. Ensure that the radiant heater is fixed securely to the installation surface. In terms of tensile and shear
strength, the fixings must be able to withstand at least 3 times the weight of the radiant heater (in cluding accessories)
that is to be installed. When installing the unit, use the correct screws (supplied) for the surface.
Please bear in mind that you only need one fixing bracket to fix your unit safely. Please refer to the minimum installation
dimensions for the unit (cf. „spacings").
Acc. to EU 2015/1188 ecodesign directive for energy-related products the application of a thermostat with a room sensor,
weekday control system and window opening detection is mandatory, when installation a heating unit indoors. This is
®
possible with this HEATSCOPE
of this series fulfills the conformity of the ecodesign directive.
®
HEATSCOPE heaters are basically made for outdoor use – and in most cases they are used outdoors finally. Due to this
they are factory-set delivered without any thermostat control system acc. to EU 2015/1188 ecodesign directive. This is
consequent, reasonable and will economise valuable ressources. Many times a separate temperature system / thermo-
stat acc. to ecodesign directive is already installed and the heaters should be fit in this system. In this case the customer
or the assigned installer is responsible to accomplish the EU standards of the ecodesign directive.
®
radiant heater are shown in the diagrams in the beginning of
type. In combination with the optional available thermostat DEVIreg™ Smart this heater
®
packaging that comes into cir-
28