Emerson Rosemount 5708 3D Solids Scanner DeltaV Series Manual Supplement page 6

Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
2016
5. The IP Address of the VIM can be set to any available IP on the network; the availability of an IP can
be checked using the Ping function at the bottom left of the pop up window. Select OK when all of
the parameters are set correctly. This will create a new VIM connection for the controller emulating
four serial I/O cards.
Figure 1-2. Set the VIM Properties
A. Any available IP will work
B. Subnet mask set to match network
C. Check IP availability here
6. Right-click the VIM which was just added and select Commission. A list will populate with
Decommissioned VIMs on the network.
7. Select the desired VIM to be commissioned (an Identify VIM function is available in the bottom right
of the window).
8. Check that the IP Address field matches the available IP address set in 4, and select OK.
9. Expand the VIM icon to see the emulated serial cards, numbered 57-60. To begin the setup of the
VIM, expand one of the cards and right-click on one of the serial ports assigned to the card. Select
Add Device to open the Device Properties window.
6 Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
Manual Supplement
00809-0300-4570, Rev BA