Table of Contents
Advertisement
Manual Supplement
00809-0300-4570, Rev BA
13. Select OK.
14. Right-click on the port which was just enabled and select New Serial device. This device will
represent the 3D Solids Scanner device. The Properties window opens.
15. In the Properties window, enter any desired Description and the Device Address. The Device Address
will be the 3D Solids Scanner's SCADA ID. Select OK when finished.
16. Expand the port with the newly added device.
17. Right-click on the new device and select New Dataset, see figure below.
Add a new dataset to the device.
18. In the Dataset properties window, change the following parameters and select OK when finished. See
Table 1-2
Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
for an example configuration which displays all 13 parameters.
a. On the General tab, in the Data direction list, select input.
Rosemount 5708 Series 3D Solids Scanner Integration with DeltaV
2016
11
Advertisement
Table of Contents
