Handicare SystemRoMedic RiseAtlas450M QuickTrolleySystem Manual page 6

If the desired position for the lift unit is not parallell to the rail the quick trolley release bracket, marked red in fig 5, can be
adjusted by 45-degree angle intervals.
I. Open the cover by removing the two screws at the top. More detailed information can be find in the service
manual for RiseAtlas450.
II. Release the four screws that hold the top bracket in place. Rotate the quick trolley release bracket into the
desired angle, fig 6.
III. Mount the top bracket and the covers back to their original position.
6
Figure 5; Quick trolley release bracket
Figure 6; Adjusting the
QuickTrolleyReleaseBracket
UNLESS OTHERWISE SPECIFIED: FINISH:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
SEE DETAILS
TOLERANCES:
LINEAR:
ANGULAR:
NAME SIGNATURE DATE
DRAWN
CHK'D
APPV'D
MFG
Q.A
SystemRoMedic
M A N U A L
UNLESS OTHERWISE SP
DIMENSIONS ARE IN M
SURFACE FINISH:
TOLERANCES:
LINEAR: D
ANGULAR: B
E
NAME
DRAWN
CHK'D
APPV'D
MFG
Q.A
9000
MATERIAL:
SEE DETA
WEIGHT:
TM