Daikin Maverick II MPS062E Installation And Maintenance Manual page 25

Mechanical Installation
Intake Hood Damper (0% to 30% Outside Air)
These dampers are intended to remain at a fixed position Figure 28: Damper Linkage Bar Typical for All Sizes
during unit operation, providing fresh air quantities from 0%
to 30% of the total system airflow, depending on the damper
setting. This setting is made at the linkage rod on units with
manually adjustable linkages.
On units provided with MicroTech III controls, the damper
position may be set at the controller keypad. During unit
operation, the two-position actuator drives the damper to the
position set on the keypad. During the OFF cycle, the damper
is automatically closed.
No unit-mounted exhaust dampers are provided with this option.
www.DaikinApplied.com 25 IM 991-2 • MAVERICK II ROOFTOP