Technical Data - Graco Bulldog Hydra-Cat Series Instructions And Parts List

Pumps
Air operating range . . . . . 40–100 psi (280–700
Air consumption . . . . . . . . See example below
Fluid inlet size . . . . . . . . . 3/4 npt
Fluid outlet size . . . . . . . . 3/8 npt
Air inlet size . . . . . . . . . . . 3/4 npt
Maximum fluid outlet
pressure . . . . . . . . . . . . . . 3000 psi (21 MPa,
Maximum fluid inlet
pressure . . . . . . . . . . . . . . 250 psi (1.7 MPa, 17 bar)
Wetted parts . . . . . . . . . . . Stainless steel, tungsten
Air consumption example:
When the air pressure to the pump is 60 psi (410 kPa,
4.1 bar) and you are dispensing 1 gal. (3.8 liter) of
mixed fluid per minute, air volume used, in cfm, will be
about the same as the larger pressure ratio figure of
your pump. See page 6 for pressure ratios of pumps.

Technical Data

kPa, 2.8–6.37 bar)
207 bar)
carbide, chrome plating,
carbon steel, PTFE,
ultra-high molecular
weight polyethylene
Manifold assemblies
Manifold outlets . . . . . . . . 3/8 npt
Hoses . . . . . . . . . . . . . . . . 3/8 in. ID, PTFE, cpld 3/8
Hoses . . . . . . . . . . . . . . . . 3/8 in. ID, nylon, cpld 3/8
Automatic pressure relief
valves wetted parts . . . . . 303 stainless steel,
npt(m) 4000 psi (28 MPa,
276 bar) maximum
working pressure
npt(m) 3000 psi (21 MPa,
207 bar) maximum
working pressure
tungsten carbide,
fluoroelastomer
308225 45