Accessories - Graco Bulldog Hydra-Cat Series Instructions And Parts List

Parts for Installing Optional Heaters
The following components are recommended to install
the heaters as instructed on page 13. Two displace-
ment pump models need Items 201 to 204. Three
displacement pump models need Items 201 to 205 and
an additional resin and hardener hose of an
appropriate length.
Ref. Part No. Description
No.
201 — FLUID HEATER, select from list
to the right
202 155494 SWIVEL UNION, 90_, 3/8–18
npt (m x f)
203 161037 SWIVEL UNION, 90_, 1/2 npt(f)
x 3/8–18 nps(m)
204 235905 HOSE, cpld, hardener, 3/8–18
npt x 30" mbe 0.318 ID PTFE
205 217378 HOSE, nylon, with spring
guards, resin, cpld 3/8–18 npt x
30" (mbe) 3/8" ID
205
40 308225

Accessories

Qty.
2
2
2
1
1
201a
201b
201
202
204
203
02891
Viscon HP Fluid Heaters
Style A
Model 245848, 120 Volt, Stainless Steel
4000 psi (28 MPa, 276 bar) Maximum Working Pressure
85_ – 220_ F (29_ – 104_ C) Temperature Range
Model 245863, 240 Volt, Stainless Steel
4000 psi (28 MPa, 276 bar) Maximum Working Pressure
85_ – 220_ F (29_ – 104_ C) Temperature Range
Model 245864, 480 Volt, Stainless Steel
4000 psi (28 MPa, 276 bar) Maximum Working Pressure
85_ – 220_ F (29_ – 104_ C) Temperature Range
Style B
Model 226819, 240 Volt Aluminum and Zinc
3000 psi (21 MPa, 207 bar) Maximum Working Pressure
80_ – 190_ F (26_ – 88_ C) Temperature Range
Style A
Model 220522 shown
Style B
Model 226819 shown