Associating Alarms To Dry Contact Output Ports - Huawei SMU01C User Manual

SMU01C
User Manual
Figure 9-3 Modifying default DIN2 port status
Step 4 Check whether a heater fault alarm is generated.
If not, the default DIN2 port is successfully modified.
----End

9.1.4 Associating Alarms to Dry Contact Output Ports

The SMU01C provides four dry contact outputs that relate to the alarms in Table 9-1. Table
9-2 lists the default dry contact output configurations. You can modify the configurations as
required.
Table 9-2 Default dry contact output configurations
Dry Contact
ALM1
ALM2
ALM3
ALM4
Issue 03 (2015-01-05)
Alarm Association
Major Alarm
Minor Alarm
None
None
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Default Status (NO, NC)
NO
NO
NO
NO
9 Alarm Management
32