Installation; Installing An Smu01C - Huawei SMU01C User Manual

SMU01C
User Manual
To protect an SMU01C, wear electrostatic discharge (ESD) gloves when installing or
replacing the SMU01C.

3.1 Installing an SMU01C

To install an SMU01C, perform the following steps:
Step 1 Hold the handle of the SMU01C, and insert the SMU01C into the correct position in the
power system.
Step 2 Push the SMU01C until its front panel aligns with the front panel of the power subrack.
Step 3 Push the locking latch on the front panel to the right.
Figure 3-1 Installing an SMU01C
----End
Issue 03 (2015-01-05)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3

Installation

3 Installation
7