Mitsubishi Electric MELSEC-Q Series User Manual page 84

(1) A1S61PN
9)
3)
4)
5)
7)
No. Name
1) POWER LED
2) 24 V and 24 G terminals
3) FG terminal
4) LG terminal
5) Power supply input terminals Used to connect 100VAC to 200VAC power supply.
6) Power supply input terminals Used to connect a 24VDC power supply.
7) Terminal screw
8) Terminal cover
9) Module fixing screw
POINT
(1) Do not use the terminal which is printed NC on the terminal block.
(2) Be sure to ground the terminal LG and FG to the protective ground conductor.
(2) A1S62PN
9)
1)
8)
2)
3)
4)
5)
7)
9)
3)
4)
6)
7)
(3) A1S63P
The indicator LED for the 5 VDC power.
Used to supply 24VDC to inside the output module
(using external wiring).
The grounding terminal connected to the shield pattern of
the printed circuit board.
Grounding for the power supply filter. The potential of
A1S61PN or A1S62PN terminal is 1/2 of the input voltage.
M3.5 × 7
The protective cover of the terminal block.
Used to fix the module to the base unit. (M4 screw,
tightening torque : 59 to 88 N•cm)
50
1)
8)
Description
1)
8)