*2 This index indicates the degree to which conductive material is generated in terms of the
environment in which the equipment is used. Pollution level 2 is when only non-conductive
pollution occurs. A temporary conductivity caused by condensing must be expected
occasionally.
*3 Do not use or store the programmable controller under pressure higher than the
atmospheric pressure of altitude 0m. Doing so may cause malfunction.
When using the programmable controller under pressure, please consult your local
Mitsubishi Electric representative.
*4 When an A series extension base unit (A52B, A55B, A58B, A62B, A65B, A68B) is used in
the system, the following specifications apply.
Under
intermittent
vibration
Under
continuous
vibration
Frequency
Acceleration
10 to 57Hz
57 to 150Hz
10 to 57Hz
57 to 150Hz
Amplitude
———
0.075mm
2
9.8m/s
———
———
0.035mm
2
4.9m/s
———
4
Sweep count
10 times each in
X, Y, Z directions
———