Fuel - WilTec 61495 Operation Manual

1. Before beginning work, clear your working area.
2. When using your brush cutter do not grip other parts except the handles.
3. When using your brush cutter never take your eyes off, if you need to place
the throttle into the idling position.
4. When using your brush cutter do not let the unit get close to your feet nor
raise the unit above your waist
Transportation
1. Make sure the appropriate blade cover is in place.
2. When transporting by car fix the unit firmly using a rope, do not transport by bicy-
cle or motorcycle because it is dangerous.
3. Never transport the brush cutter over rough roads over long distances without first
removing all fuel from the fuel tank, as doing so might cause fuel to leak from the
tank.
Operation safety precautions
1. Grip the handles of the brush cutter firmly with both hands. If you suspend the
work, place the throttle into the idling position.
2. Always be sure to maintain a steady even posture while working.
3. Maintain the speed of the engine at the level required to perform
cutting work and
level necessary.
4. If the grass gets caught in the blade during operation or if you
need to check the unit or refuel the tank always be sure to turn off
the engine.
5. If the blade touches a hard object like a stone immediately stop
the engine and check if something is wrong with the blade. If so re-
place the blade by new one.
6. If someone calls out while working always be sure to turn off the
engine before turning around.
7. Never touch the spark plug or plug cord while the engine is in
operation. It may result in being subjected to an electrical shock.
8. Never touch the muffler spark plug or other metallic parts of the
engine while the engine is in operation or immediately after shut-
ting down the engine. Doing so may result in serious burns.
9. When you finish cutting in one location and wish to continue
work in another spot turn off the engine and turn the unit as the
blade faces away from your body.
Maintenance safety precaution
1. Perform the maintenance and checking operations described in this manual at reg-
ular intervals. If any parts must be replaced or any maintenance or repair work not
described in this manual must be performed please contact a representative from the
store nearest authorized servicing dealer for assistance.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
never raise the speed of the engine above the
Seite 27