WilTec 61495 Operation Manual page 6

Also try to keep the total amount of work performed in a single day under 2 hours or
less.
1. Be sure to keep this manual handy so that you may refer to it later whenever any
questions arise.
2. Never allow children or anyone unable to fully understand the directions given in
this manual to use this brush cutter.

Working gear and clothing
Working considering handling of fuel
a. The engine of this product is designed to run on a mixed fuel which
contains highly flammable gasoline. Never store cans of fuel or refill
the fuel tank in any place where there is a boiler stove, wood fire, elec-
trical sparks, welding sparks, or any other source of heat or fire which
might ignite the fuel.
b. Smoking while operating the product or refilling its fuel tank is extremely danger-
ous. Always be sure to keep lit cigarettes away from the product at all times.
c. When refilling the tank always turn off the engine first and take a careful look
around to make sure that there are no sparks or open flames anywhere nearby be-
fore refueling.
d. If any fuel spillage occurs during refueling, use a dry rag to wipe up spills before
turning the engine back on again.
e. after refueling, screw the fuel cap back tightly onto the fuel tank and then carry the
product to a spot 3 m or more away from where it was refueled before turning on the
engine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
a. When using the product, you should wear proper clothing
and protective equipments as follows.
( 1) Helmet
( 2) Protection goggles or face protector
( 3) Thick work gloves
( 4) Non-slip-sole work boots
( 5) Ear protectors
b. And you should carry with you
1. Description
2. Properly locked fuel tank
3. Spare blade
4. Things to notify your working area (shutter band,
warning signs)
c. Never use the product when wearing pants with loose
cuffs, when wearing sandals, or when barefoot.
Seite 25