Maintenance - WilTec 61495 Operation Manual

8. Maintenance

Blade
- Sharpen each cutting edge and make sure the
rounded.(F13)
- Do not cool the blade with water in case of
cracks on blade.
Air cleaner
A clogged air filter may increase fuel consumption while cutting down the engine
power.
If you operate the brush cutter without the air filter or with a deformed filter element
will quickly ruin the engine.
Fuel Filter
Take the filter out of the fueling port using a small wire hook. Disconnect the filter as-
sembly from the fuel pipe and unhook the retainer to disassemble it. Clean the com-
ponents with gasoline.
A clogged fuel fitter may cause poor acceleration of the engine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
using grinder. If may cause
Check and clean the filter element in warm
soapy water if
required. Dry completely before installing. If the
element is broken or shrunk replace with a new
one. (F14)
(1) cover
(2) Element
(3) screen
(4) Body
bottom corner is
Seite 34