WilTec 61495 Operation Manual page 12

7. Operation
Starting the engine
- Before starting the engine inspect the entire unit for loose fittings or fuel leaks and
the
cutting attachment is properly installed and securely fastened.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
- Place the unit on a flat firm place. Keep the cut-
ting head clear of everything around it.
1. Turn the cap to the fuel tank to make sure that
it is fixed on tightly (F8)
(1) Cap
(2) Fuel tank
2. Open the fuel tank cock.(F9)
3. Move the choke lever to the closed position.
(F9)
(1) Choke lever
(2) Fuel cock
(3) Close
(4) Open
(5) Close
(6) Open
Seite 31