Operation - WilTec 61495 Operation Manual

2. Under no circumstances should you ever take apart the brush cutter or alter it in
any way. Doing so might result in the brush cutter becoming damaged during opera-
tion or the brush cutter becoming unable to operate properly.
3. Always be sure to turn off the engine before performing any maintenance or
checking procedures.
4. When sharpening removing the blade with proper tools and equipment to prevent
injury.
5. When replacing blade or any other parts or when replacing the oil or any lubricants
always be sure to use only products which have been certified by for use with the
brush cutter.
5. Set up
Engine and main pipe
Align the hanger and the fuel tank using attached 4 socket screws secure the con-
nection firmly with equal force.(F1)
(1) Fuel tank
(2) Molt
(3) Main pipe
Handle
Safety guard
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
1.Loosen the 4 bolts on the handle bracket.(F2)
2.Insert the right handle (throttle lever is at-
tached) and the
bracket and retighten the bolts
securely.(F2)
(1) Handle bracket
(2) Right handle
(3) Bolt
(4) Left handle
(5) Engine side
Attach the safety guard to the gear case and fix it
with the clamp and 2 bolts (M5*25) securely.(F3)
(1) Bolt
(2) Clamp
(3) Main pipe
(4) Safety guard
left handle assembly into the
Seite 28