INTRODUCTION
General Information
VAL-CO® fans are engineered to provide superior technology, durability and value with state-of-the-art features
designed for maximum efficiency and long-lasting performance.
This manual will provide you with installation instructions, operation and parts list for the slant wall fiberglass fan
models. Please check your shipment for correct parts and condition. (Refer to the Appendixes for your correct fan
model and parts listing.) The exploded view below and the hardware shown on page 6 and 7 should help familiarize
you with the parts for installation.
Tools Required:
• Regular Screwdriver
• Hammer
• 7/16", 1/2", 9/16", 5/16" Open End Wrenches or Socket Wrench with 7/16", 1/2", 9/16", 5/16" Sockets
• Wire Cutters and Strippers
• 1/8" Hex Key Wrench
• 1/8" Open End Wrench or a 12 Point 3/8" Socket and Ratchet
©2017 Valco Companies, Inc.
7