Table of Contents
Advertisement
Introduction
Hypermax FansTM come pre-assembled (except for the cone and cone screen).
Please check your shipment for correct parts and condition.
•
Read all safety information, instructions and illustrations before starting to assemble your new fan. Please
review the complete assembly manual twice before starting and be sure to check your shipment with the
packing list for any shortages. Please report shortages promptly.
•
Metric measurements are shown in parenthesis throughout the manual.
Example: 13" (330mm)
Tools Required:
• 5/16", 7/16", 1/2", 9/16" Open End Wrenches or Socket Wrench with 5/16", 7/16", 1/2", 9/16" Sockets
• Wire Cutters and Strippers
• 1/8", 5/32" Hex Key Wrenches
• 12 Point 3/8" Socket and Ratchet
• 1/4" Socket Driver
Socket set
Hex Key Wrench set
Open End Wrench set
Wire Cutter
6
©2021 Valco Industries, Inc.
Advertisement
Table of Contents
