Assembly INsTRUCTIONs
Fan Assembly
1. Support the fan housing, using wood blocks or cardboard boxes, at the four corners as shown below to allow
for easier assembly.
Figure 1
Motor Mount and Rail Assembly
2. Assemble the Belt Drive Motor Mount (# 936008) to the Motor Mount Rails (#936007 or 948007) using the
936026 Hex Head Bolts and securing with the 936054 Nylock nuts. You may Insert the bolts through the inside of
the mount toward the outside of the rails or from the outside to the inside, as shown in Figure2 .
Figure 2
Do not tighten at this time.
10
USE SLOWEST SPEED
WHEN USING POWER TOOLS
Galvanized part numbers
shown - also available in
stainless steel
©2017 Valco Companies, Inc.