G3D T-1000 Manual page 48

ADJUSTING THE PROJECTOR
FOCUSING THE PROJECTOR
Make sure not to drop the focus lock knob in the printer.
11. Slightly loosen the focus lock knob. Rotate the knob counter clockwise to a
360 degree only. Do not remove the focus lock knob from the projector.
FOCUS LOCK KNOB
12. Slowly dial the focus ring until the projected uv light of TestFocus appears
sharp.
FOCUS RING
13. After focus is perfect, lock the focus lock knob.
FOCUS LOCK KNOB
T-1000 45