Digital Light Processing; Photopolymer Resin - G3D T-1000 Manual

ABOUT 3D PRINTING
XXX
CONNECTION
XXX
1. CONNECT YOUR DEVICE
TO T-1000 PRINTER WIFI
SSID: G3DPrinter
PASSWORD: G3D54321

DIGITAL LIGHT PROCESSING

T-1000 has a completely custom designed UV LED light engine that uses the DLP
technology to cure liquid resin into solid prints. Digital Light Processing (DLP) is
a display device that uses a digital micromirror device. The display device is a
projector that will flash a single image of each layer across the entire build plate at
once. Image is displayed as square pixels therefore the print is composed of
voxels.

PHOTOPOLYMER RESIN

G3D Photopolymer Resin is a type of polymer that changes its physical properties
when exposed to UV light. Photopolymer liquid plastic resin turns to solid when
introduced to a specific light source.
G3D Resins have optimal settings that can be your reference as your base line
when your printer is set to XY:175 microns and Z Layer: 120 microns. Consult to
the Resin Cure Matrix for more info about cure time settings.
T-1000
G3D WEB USER INTERFACE
g3dprint:8080
1. TYPE: G3DPRINT:8080
IN THE WEB BROWSER
2. UPLOAD .G3D FILE FOR
PRINTING
X-axis
3. PREPARE THE
PRINTER
5