WL290 FEATURES AND BENEFITS
Cold, and Hot Water
The WL290 Water Treatment System unit comes standard with Cold and Hot Selections to meet a
wide range of customer demands. Cold Water temperature is adjustable.
High Volume Storage and Water Capacity
The WL290 Water Treatment System unit has 4 liters (1 Gallon) in Cold Tank and 11.2 Liters (3
Gallons) in the Cold‐Water Reservoir (total of 15 Liters of Ice Cold Water) and 1.6 Liters (.42 Gallons)
of Hot Water Capacity.
BioCote®Anti‐Microbial Protection
Certain plastic, silicon, and painted surfaces surrounding the dispensing areas and
drip tray are infused with an exclusive additive called BioCote®. BioCote® provides
an effective barrier against microbes like bacteria and mold, which may cause odors
or staining.
Large Dispense Area with Recessed Faucet
9.0 inch dispense height with BioCote® recessed faucet to protect from cross‐contamination.
Leak Detection
The WL290 Water Treatment System unit is supplied with a Sensor in
the Leak Tray that halts water supply to prevent overflow.
Energy Saving Sleep Mode
If no input of water for 3 hours, the WL290 goes into Energy Saving Sleep
and turns off the Hot Tank. The WL290 Water Treatment System can be
programmed to turn off the Sleep Mode.
Advanced Programming Customizable settings for optimizing each
WL290 Water Treatment System including; Cold Temp Set Point, Hot
Temp Set Point, Filters Timer Setting, and Energy Saver Sleep Mode
Child Safeguard
The WL290 Water Treatment System unit requires two separate buttons
to be held down in the correct sequence to prevent accidental
dispensing of hot water.
In‐Tank UV Purification
Industry leading In‐Tank UV Purification prevents the growth of bio‐film
within the Stainless Steel Cold Tank.
WL290 Manual
Page 6 Revision 7‐1‐2019